How do you clean K-Rend?

Soft wash only. Apply a sodium-hypochlorite based biocide at low pressure, let it dwell, then rinse with pure water at low pressure. Never use a jet wash, it ruins the silicone finish and opens the surface to water.

Can you clean monocouche render?

Yes, same soft-wash method as K-Rend, with biocide dilution tuned for the through-coloured surface. Pressure washing monocouche pulls colour out and shows immediately.

How much does render cleaning cost?

Most semi-detached homes are £180,£450 depending on render area and access. Detached homes with full wraps run £450,£900.

Will the algae come back?

Most properties stay clean for 3,5 years. Shaded, north-facing or tree-lined walls are quicker to regrow, we offer a top-up biocide spray every 2 years on a maintenance plan.

Will it damage my windows or plants?

No. The biocide is plant-safe at our dilution; window frames and gutters are rinsed clear before we finish.

Do you cover the newer estates at Cawston and Brownsover?

Yes, all of CV21, CV22 and CV23 are inside the normal round with no travel charge.

Why is only one side of my house green?

That is almost always the shaded or weather-facing elevation. It stays damp longer, so algae establishes there first. Treating the whole elevation rather than spot cleaning is what stops it coming straight back.

Friendly local service, same crew, same standards, every job.

Render Cleaning in Rugby

Soft-wash K-Rend, monocouche and silicone render cleaning. Never a pressure washer.

Call now

Fully insured, £2m public liability Satisfaction guaranteed 5★ rated on Google Free no-obligation quotes

Render cleaning in Rugby starts from £180 and uses soft-wash methods only, never a pressure washer on modern thin-coat render. We treat algae, red lichen and black streaking on K-Rend, monocouche and silicone systems with a controlled biocide and pure-water rinse. The render goes back to its original colour without etching the surface or damaging the bead lines.

render cleaning in Rugby, what we actually find here

The housing round here. Victorian and Edwardian terraces near the centre, large interwar semis in Bilton and Hillmorton, and a lot of newer estate housing at Brownsover and Cawston.

Why Rugby exteriors get dirty. Open, exposed sites on the newer estates catch prevailing wind and rain, which drives dirt into render on the weather side. The older Bilton roads are the opposite problem, shaded and mossy.

Access and pricing. Newer Cawston and Brownsover plots tend to be tight between houses, so we work with compact kit rather than dragging bulky equipment through a side gate.

Covering CV21, CV22, CV23, including Bilton, Hillmorton, Brownsover, Cawston.

Why professional render cleaning matters

Modern thin-coat render, K-Rend, Weber, Parex, Wetherby, is sensitive. Pressure washing scours it, opens the surface to water ingress and ruins the finish. The right method is soft wash: a biocide that kills the algae and red lichen at root, followed by a gentle rinse. The render returns to its original colour over a few weeks as rain carries the dead growth away.

K-Rend (silicone)

Monocouche (Parex, Weber)

Silicone & acrylic thin-coat

Traditional sand & cement render

Pebble dash

Our render cleaning process

Honest, step-by-step. No surprises on the day.

1
Identify the render
We check what's been applied, K-Rend silicone behaves differently to monocouche and pebble dash.
2
Pre-treat
Soft-wash biocide at the right dilution for the substrate, never a one-size-fits-all spray.
3
Dwell time
Biocide left to work, typically 20,40 minutes.
4
Pure-water rinse
Low-pressure rinse from the ground via reach pole. No abrasion, no etching.
5
Follow-up
Optional courtesy second visit 2,4 weeks later to check the result has come up evenly.