How do you clean K-Rend?

Soft wash only. Apply a sodium-hypochlorite based biocide at low pressure, let it dwell, then rinse with pure water at low pressure. Never use a jet wash, it ruins the silicone finish and opens the surface to water.

Can you clean monocouche render?

Yes, same soft-wash method as K-Rend, with biocide dilution tuned for the through-coloured surface. Pressure washing monocouche pulls colour out and shows immediately.

How much does render cleaning cost?

Most semi-detached homes are £180,£450 depending on render area and access. Detached homes with full wraps run £450,£900.

Will the algae come back?

Most properties stay clean for 3,5 years. Shaded, north-facing or tree-lined walls are quicker to regrow, we offer a top-up biocide spray every 2 years on a maintenance plan.

Will it damage my windows or plants?

No. The biocide is plant-safe at our dilution; window frames and gutters are rinsed clear before we finish.

Can you clean a listed building in Warwick?

Yes. We only use ground-based, low-pressure methods on listed property, which means no fixings and no abrasion. If your consent conditions say anything specific, send it over and we will work to it.

Is lime mortar a problem?

It is if you blast it. Lime mortar is soft, so we drop the pressure right down and let the treatment do the work instead of the water.

Soft-wash methods safe for listed buildings and conservation areas.

Render Cleaning in Warwick

Soft-wash K-Rend, monocouche and silicone render cleaning. Never a pressure washer.

Call now

Fully insured, £2m public liability Satisfaction guaranteed 5★ rated on Google Free no-obligation quotes

Render cleaning in Warwick starts from £180 and uses soft-wash methods only, never a pressure washer on modern thin-coat render. We treat algae, red lichen and black streaking on K-Rend, monocouche and silicone systems with a controlled biocide and pure-water rinse. The render goes back to its original colour without etching the surface or damaging the bead lines.

render cleaning in Warwick, what we actually find here

The housing round here. Listed and period property in the town centre, Victorian and Edwardian terraces around Emscote, and larger modern family homes at Woodloes Park, Heathcote and Chase Meadow.

Why Warwick exteriors get dirty. Old soft brick, lime mortar and timber sit alongside modern render across the town, so the right treatment changes street by street rather than job by job.

Access and pricing. Town-centre properties often have narrow frontages and controlled parking, so we confirm the parking plan before the day to avoid wasted time.

Covering CV34, CV35, including Warwick Town, Heathcote, Woodloes Park.

Why professional render cleaning matters

Modern thin-coat render, K-Rend, Weber, Parex, Wetherby, is sensitive. Pressure washing scours it, opens the surface to water ingress and ruins the finish. The right method is soft wash: a biocide that kills the algae and red lichen at root, followed by a gentle rinse. The render returns to its original colour over a few weeks as rain carries the dead growth away.

K-Rend (silicone)

Monocouche (Parex, Weber)

Silicone & acrylic thin-coat

Traditional sand & cement render

Pebble dash

Our render cleaning process

Honest, step-by-step. No surprises on the day.

1
Identify the render
We check what's been applied, K-Rend silicone behaves differently to monocouche and pebble dash.
2
Pre-treat
Soft-wash biocide at the right dilution for the substrate, never a one-size-fits-all spray.
3
Dwell time
Biocide left to work, typically 20,40 minutes.
4
Pure-water rinse
Low-pressure rinse from the ground via reach pole. No abrasion, no etching.
5
Follow-up
Optional courtesy second visit 2,4 weeks later to check the result has come up evenly.